Oil change pump / Diesel pump 12V Oil pump

Make your oil change quick and easy with our 12V Oil Change Pump / Diesel Pump. Avoid spills and unnecessary hassle and get the job done smoothly and efficiently.

The crocodile clips allow you to easily connect the pump to the battery.
The pump has a bracket so it can be easily mounted where it is needed.
Easily sucks up the oil through the dipstick hole on the engine.

Specification:

Rated voltage: DC 12V
Rated power: 60W
Max pressure: Max. 0.8 MPa
Maximum flow: 5L/min
Pump Diameter: approx. 4.8 cm, length: approx. 14.5cm
Outlet pipe diameter: approx. 10mm x 137cm (Dia. * L)
Inlet pipe diameter: approx. 8 mm, 6 mm, length: approx. 110cm
Cable length: approx. 68cm
Cutting length: approx. 8cm
Black color

How to use:
1) Start by running the car engine for a while, when the oil temperature reaches about 50 degrees, start pumping oil.
2) Connect the pump to the power, run it for a while and observe whether the inlet and outlet are normal.
3) Then open the filler cap, remove the dipstick, force the hose to the bottom of the oil pan.
If there is no oil coming out or it pumps up very slowly or intermittently, it is generally caused by loose hoses and hose fittings. You will need to reinstall the hoses and fittings.
4) After oil pumping, remove the hose and then run the pump for a while, pump out the remaining oil inside the pump clean or pump water for a while until the pump head becomes clean.
5) If you haven't used it for a long time, it can't suck, just pour water into the pump and run the pump for a few minutes until the air is completely out.

The package contains:
1pc x oil pump
1pc x 10mm outlet pipe
1pc x 8mm hose
1pc x 6mm hose

Note:
If you want to connect this pump to mains power, you will need a power converter.
Please allow 1-5mm deviation due to manual measurement.
Due to the light and screen difference, the item's color may be slightly different from the pictures.